Wire Partition - window

These Woven Wire Partition can be used to create stock or storage rooms, visible working room in warehouse area.

Wire Partition - window:

1) 10 gauge steel wire woven into 1-1/2" diamond mesh, securely attached to framing2) Vertical frame: 1-1/4 x 5/8" cold rolled 'C' steel channels with 1/4" bolt holes

3) Horizontal frame: 1 x 1/2" cold rolled steel channels

4) All joints are mortised and tenoned

5) Center reinforcing bar: two cold rolled steel channels 1 x 3/8" riveted through wire     mesh at 3'6" from floor, additional bar required for 12' high partition6) Top capping bar: 1-1/2 x 1" cold rolled steel channel, with 1/4" bolts 30" O.C.

7) Corner posts: 1-1/2 x 1-1/4" steel angles with 1/4" bolt holes

8) Floor sockets: cast aluminum

9) Door frame: 1-1/4 x 1/2" cold rolled steel channel

10) Sliding doors have two four-wheel roller bearing truck/hangers enclosed in a     galvanized steel box track and one steel channel bottom guide

11) Hinge doors have 1-1/2 pairs of butt hinges bolted to door and transom frame

12) Locking clasps arranged for padlocking or cylinder mortise lock outside with     recessed knob inside available 13) All partitions have 3" sweep space and include hardware and accessories for     proper installation, specify partition to wall connection hardware separately 14) Surface finish: one shop coat gray powder coated

Wire Partition - window